If you’re planning to buy an engagement ring for your significant other, one of the first things you have to think about is how big the diamond will look on your finger. Diamonds with different carat weights will look different on smaller and bigger fingers.
In this article, we’ll explain how big a diamond ring will look on a finger. Additionally, we’ll go through different diamond carat weights and compare them to various ring sizes.
0.25 Carat Diamond on Finger | 0.50 Carat Diamond on Finger | 0.75 Carat Diamond on Finger | 1 Carat Diamond on Finger | 1.5 Carat Diamond on Finger | 2 Carat Diamond on Finger | 2.50 Carat Diamond on Finger | 3 Carat Diamond on Finger | 3.50 Carat Diamond on Finger | 4 Carat Diamond on Finger | 5 Carat Diamond on Finger | 6 Carat Diamond on Finger | Talk to an Expert
How Big Will a Diamond Ring Look on My Finger?
To know how big will a diamond ring fit on a finger, you need to know the exact ring size. U.S. women’s ring sizes vary from 3 to 9, with an average size of 6.5. This standard size fits a finger that is 17mm (or 16.9 mm, to be more specific) wide.
There are different ways to measure ring sizes. You can do it with a string and a ruler or measuring tape or purchase a ring sizer. This is important to know because the relationship between the ring size and the diamond’s carat weight makes a big difference in how big the diamond will look on a finger.
Important Note: Remember that a diamond’s size and carat weight are not the same. The size of a diamond refers to its measurements (i.e., height and weight). On the other hand, the carat weight is just how much the diamond weighs in grams. This is why you should always ask about the diamond’s measurements, not just the carat weight.
0.25 Carat Diamond on Finger
A 0.25-carat diamond is 4mm in diameter. Therefore, if you wear a 6.5 ring size, a round-cut 0.25-carat diamond will take up 23.5% of your finger’s width.
Diamond engagement rings with a 0.25-carat diamond are some of the smallest you’ll probably find on the market. While diamonds can be cut to weigh as small as 0.02 carats, they’re usually used for accent stones or earrings. However, if you’re on a budget and want to pay under $1,000, you’ll be able to get a diamond of this size.
A 0.25-carat diamond engagement ring usually has a solitaire setting. A thinner band is the best way to make a 0.25-carat diamond appear more prominent. In contrast, a wide band can make the diamond look even smaller. A 0.25-carat diamond can look flattering on your hand if you have long and thin fingers.
- 0.44ct Diamond Tiffany Ring
SOLD
- 0.41ct Cartier French Ring
SOLD
- 0.22ct Tiffany Ring
$2,200
0.50 Carat Diamond on Finger
A 0.50-carat diamond has a 5.2mm diameter, which is approximately 1/5 of an inch. A diamond that weighs 0.50 of a carat takes up about 30% of the finger’s width.
If we compare a half-carat diamond to a one-carat diamond, we would see that the first one has a 5.2mm diameter, while the other has a 6.5mm diameter. In other words, even though a 0.50-carat diamond is half the weight of a one-carat diamond, its diameter is smaller by only 21%.
Moreover, although it’s twice the size of a 0.25-carat diamond, its price can grow exponentially. The average cost of a natural round-cut 0.50-carat diamond is $2,360. As with all diamonds, the price is also determined by other “4Cs,” like the color, clarity, and cut. Since the visual size difference is minimal, a 0.50-carat diamond ring would also look better on slender, long fingers.
Diamond engagement rings with 0.50 carats usually come in solitaire settings but are also available with accent stones. For example, take a look at the Blairstown ring. It’s a beautiful original Art Deco ring, handcrafted in the 1930s, with an old European-cut 0.55-carat diamond framed by pave-set single-cut diamonds on the shoulders.
The Wheaton ring is another exquisite 0.59-carat diamond engagement ring from our collection. It has an old European cut, G color, and SI1 clarity. It measures approximately 5.55mm x 5.85mm x 3.40mm.
- Estate 0.50ct Diamond Vintage Engagement Ring. Circa 1950, France
$2,500
- Wheaton Ring
$3,800
- Central Park Ring. Platinum Diamond and Sapphire Ring.
$4,000
0.75 Carat Diamond on Finger
A diamond with 0.75 carats is 5.7mm wide in diameter. For comparison purposes, a 0.80-carat diamond with a brilliant cut is 6mm in diameter, so it would be challenging to tell the difference if you’re not an expert. In other words, a 0.75-carat diamond covers 33% of the width of a finger, while a 0.80-carat diamond covers 35%.
A well-cut 0.75-carat diamond can appear as large as a 1-carat diamond. It all depends on the quality of the diamond’s proportions, such as the facets and angles, which can determine the diamond’s brilliance. Since this diamond size is slightly larger than the previous two, you can find it with a wider variety of cuts. Regarding settings, pave-set solitaire diamond engagement rings are the most popular. They also come with beautiful halo-style settings.
In terms of price, a diamond that weighs 0.75 carats can cost around $3,000 on average. The price can vary from $800 to $8,500 depending on its quality. Note that this is the average price for an earth-mined diamond, as lab-grown diamonds usually cost two to three times less.
A 0.75-carat diamond would look disproportionate on thick and large fingers. If you wear a size smaller than the average, a 0.75-diamond engagement ring will likely look flattering on your hand.
The Derby ring is a stunning 0.75-carat old European-cut diamond engagement ring. It’s a vintage ring from the 1950s, measuring 5.91mm x 5.86mm. If you want to see more 0.75-carat diamond rings, you’ll find them on this page.
- 1.45ct Vintage Mid-Century Engagement Ring. Cesena Ring. Circa 1950
$10,500
- Vintage Engagement Ring 0.76ct Elm Park Old Euro Ring. Circa 1955
$5,800
- Brent Ring
$4,500
1.00 Carat Diamond on Finger
A round-cut 1-carat diamond has a diameter of 6.5mm (1/4 of an inch), covering about 38.2% of the finger’s width. The average carat weight of a diamond is exactly 1 carat. They are the most popular and sought-after diamonds in the world of engagement rings.
Remember, carat weight doesn’t determine the diamond’s diameter. A 1-carat diamond can have a diameter of 5.6mm, but it can also be 6.7mm in width. The diameter depends on the diamond’s cut. You’ll want to avoid diamond cuts that are too shallow or too deep. A round cut is ideal for 1-carat diamonds because it combines the right degree of depth and brilliance.
The beauty of a 1-carat diamond is that it can be set in various ways. Since it covers 1/3 of the finger’s width, it’s more noticeable than smaller diamonds.
If you want to make the diamond look bigger, we recommend a classic halo-style setting. It’s also the most neutral size, so it can look good on longer and shorter fingers with the right setting. Regarding the ring size, 1-carat diamonds would look the most flattering on people with 4 to 7 finger sizes.
When it comes to the price, this is where things get complicated. A 1-carat diamond can cost from $1,300 to $16,500. Its price depends on many factors, such as the cut, color, clarity, settings, additional stones, and overall quality.
View our 1-carat diamond engagement rings here.
- GIA 1.01ct Asscher Cut Diamond Engagement Ring. New York Ring
$9,000
- Antique Deco 1.07ct Diamond Engagement Ring. Circa 1930
$7,500
- 1.16ct Old European Cut Diamond Ring. The Sydney Ring
$8,000
1.50 Carat Diamond on Finger
A 1.5-carat diamond with a round cut is 7.4mm in diameter. Assuming you have the average ring size (6.5), a 1.5-carat diamond will cover 43.5% of your finger’s width.
Since a 1.5-carat diamond takes up almost half of the finger’s width, it is certainly noticeable. That’s why it’s a great choice for ring sizes from 5 to 7. The ideal size for a 1.5-carat diamond ring is 6 and 6.5 because it’s in near-perfect proportion with the finger’s width.
Pairing a 1.5-carat diamond with a halo-style setting is still fine even though halo-style settings tend to look better with smaller diamonds. If the center stone is too big, this setting can make the ring look overbearing. A 1.5-carat diamond would also look beautiful in a solitaire setting, which would emphasize the diamond’s sparkle.
For example, take a look at the Barrington ring. It has 1.63 carats, and it’s already the star of the show without a halo. Its beauty is magnified from the side, which reveals a crown-style setting. The additional diamonds on the ring’s shoulders only add to its shine.
On the other hand, the Plano ring is proof that a 1.59-carat diamond can look amazing in a halo-style setting. The halo is made up of French-cut rubies, creating an exquisite contrast. You can find more 1.5-carat diamond engagement rings and diamonds with a similar carat weight here.
- Chester Ring
$14,000
- Ruby Halo Engagement Ring
$5,700
- Barcelona Ring. Circa 1920, Antique, Art Deco Era
$19,500
2 Carat Diamond on Finger
As we move on to bigger, more desirable diamonds, a 2-carat diamond engagement ring is what most women want. A round-cut 2-carat diamond has a width of 8.15mm, meaning it takes up 48.2% or just about half of the finger’s width.
A 2-carat diamond ring has a much bigger visual effect or the “wow” factor we’re all looking for. Now, let’s talk about the corresponding ring size.
If you wear a 6.5 ring size (17mm), a 2-carat diamond might fit you best. However, a diamond this big may not look as good on smaller ring sizes. That’s why we recommend a 2-carat diamond ring for those with slightly bigger fingers.
As beautiful as they are, 2-carat diamond engagement rings command high prices, starting from $6,500 and going up to around $55,000. In comparison, 1.5-diamonds usually cost from $5,000 to $12,000, which is much more affordable for many.
Since 2-carat diamond engagement rings are bold and prominent on their own, they don’t require a halo. They’re usually sold in solitaire settings. For example, the Rouen ring features a round brilliant-cut diamond with 2.02 carats. The exact measurements of the ring are approximately 8.39mm x 8.38mm x 4.69mm.
Another fine example is the Ellenburg ring, which centers on a stunning 2.11-carat, D-color, round-cut diamond. Four prongs hold the center stone, while micro-pave diamonds are set along the ring’s shoulders. You can find more 2-carat diamond engagement rings here.
- Rouen Ring. Circa 1920, Antique, Art Deco Era
$19,000
- Scottsboro Ring
$23,000
- 2.05ct Old European Cut Diamond, D color, GIA Certified Ring. Aveyron Ring
$52,000
2.50 Carat Diamond on Finger
For those who want to go bigger, a 2.50-carat diamond ring is sure to make an impression. If you wear a size 6.5 ring, a 2.50-carat diamond ring will cover 51.4% of your ring’s width. That’s because it has a diameter of 8.70mm, taking up a little over half of your ring’s width. What’s more, a diamond with 2.50 carats weighs 500 milligrams or half of a gram.
Since 2.50-carat diamond rings are so large, they should be eye-clean and colorless. A diamond of this carat weight would look ideal on a size 6.5 or 7. The 2.50 carat diamonds come in different cuts, the most popular being the round brilliant cut and the emerald cut.
A 2.50-carat diamond ring can vary from $10,000 to $75,000. The reason they’re so expensive is that naturally occurring 2.50-carat diamonds are rare. In fact, the more they weigh in carats, the harder they are to come by. Like all diamond sizes, other factors, such as cut, color, and clarity, play an important role.
We have some unique vintage diamonds of similar sizes at Estate Diamond Jewelry. For instance, the Luso ring has a 2.42-carat old European-cut diamond. It’s surrounded by a delicate halo of old-cut diamonds, which don’t overwhelm the overall look. If you’re interested in more 2.50-carat diamond engagement rings, here’s what we have to offer right now.
- Middletown Ring. Circa 1910, Antique, Edwardian Era
SOLD
- Moreland Ring
$28,000
- Luso Ring
$25,000
3 Carat Diamond on Finger
A round-cut 3-carat diamond has an average width of 9.35mm. If you have the standard 6.5 ring size, a 3-carat diamond will cover approximately 55.3% of your finger’s width. A 3-carat diamond weighs the same as a raisin, which is about 0.6 grams or 600 milligrams.
You can expect to pay a lot for a 3-carat diamond engagement ring. The average price for a natural 3-carat diamond is around $75,000, but it can also cost more than $100,000. Three-carat diamonds are rare, so it makes sense that they command such a high price.
You can find them in different settings, like the solitaire, three-stone, and halo-style settings. Regarding the most fitting ring size, 3-carat diamonds will look flatter on broader and larger fingers. Anything bigger than a size 6.5 would be a good fit for a 3-carat diamond.
The Evora ring features a 3.01-carat old European-cut diamond surrounded by natural French-cut sapphires. This ring’s measurements are approximately 9.16mm x 8.86mm x 5.31mm. We also offer the Cullum ring, with a 2.97-carat diamond center. It’s an Edwardian Era-style engagement ring set in prongs and decorated with floral motifs on the mounting.
Take a look at other 3-carat diamond engagement rings from our antique and vintage diamond ring collection.
- 3.02ct Oval Rose Cut Diamond Bel Air Ring
$54,000
- Evora Ring
SOLD
- 3.14ct Transitional Cut Diamond Cascais Ring
$35,000
3.50 Carat Diamond on Finger
If your finger size is 6.5, a 3.50-carat diamond with a round cut will take up 57.3% of your finger’s width. That’s because it’s 9.75mm in diameter.
Some diamond jewelry experts say that for a diamond to be in perfect proportion to your finger, it has to be half its width. If this is what you want, a 3.50-carat diamond will look best on a size 6. However, if you don’t mind the diamond taking up more than half of your finger’s width, there are many 3.50-carat diamond engagement rings that would fit your hand beautifully.
Since a 3.50-carat diamond is a showstopper all on its own, there really is no need to add a halo. If you could get your hands on a 3.50-carat solitaire diamond, you would see that the center stone is so prominent that it doesn’t need any accents or additional details.
The average price of a 3.50-carat diamond ring is around $62,600. High-quality natural 3.50-carat diamonds can cost twice as much, up to $110,000. If you’re interested in 3.50-carat diamond rings, you’ll find some stunning pieces here.
- 3.03ct Antique Cushion Cut and Sapphire Halo Montreal Ring
$33,000
- 3.38ct Antique Cushion Cut Diamond and Sapphire Tournus Ring
$36,000
- Antique 3.00ct Diamond Geometric Halo Stockton Ring. Victorian Era, Circa 1880
$38,000
4 Carat Diamond on Finger
A 4-carat diamond has a width of 10.32mm in diameter. It takes up 60.7% of a finger that fits a 6.5 size ring. On smaller sizes, a 4-carat diamond would command a lot of attention. For example, if you wear a size 5.5, a 4-carat diamond ring would cover 64.5% of your finger’s width. On the other hand, if you wear a larger ring size, like 7.5, a 4-carat diamond would only take up 58.4% of the width of your finger which would look less ostentatious.
An average price for a 4-carat diamond ring is about $100,000, while a 4.50-carat diamond ring can be worth $117,000.
The Altona ring is an eye-catching 4.01-carat diamond engagement ring with an emerald and gold round halo. No matter from which direction you look at it, the diamond is striking and shiny. Estate Diamond Jewelry offers a luxurious collection of vintage 4-carat diamond rings, which you can check out here.
- Antique 5.03ct Old Euro Diamond Ring. Hampshire Ring. Circa 1910
$65,000
- Vintage 4.12ct Swiss Ring. Circa 1950
SOLD
- 4.09ct Asscher-Cut Diamond Engagement Ring. Haddon Ring
$140,000
5 Carat Diamond on Finger
A 5-carat diamond ring would look incredibly striking on a hand, covering 64.5% of a finger that is 17mm wide (size 6.5). Diamonds with this carat weight typically have a width of 10.9mm. Even though a 5-carat diamond ring won’t cover your entire finger, it would still be hard not to notice it.
Diamonds that are 5 or more carats would look best on large, wide fingers. For example, if you have a 7-ring size, a 5-carat diamond would cover 63% of the width, and if you wear a 7.5 ring size, it will take up 61.6%. If you have slender or small fingers, a diamond of this size will definitely be eye catching. Diamonds that are 5 carats can cost up to $150,000.
If you’re looking for a 5-carat diamond ring, take a look at the Crawford ring. This beauty features an Asscher-cut 5.03-carat diamond. The GIA-certified diamond is framed by a sapphire halo. The ring’s measurements are 8.27mm x 7.90mm x 5.54mm.
The Sanremo ring is another breathtaking 5.05-carat diamond engagement ring. It has a GIA-certified diamond with an emerald cut, I color, and VS1 clarity. In addition, calibrated baguette-cut diamonds are flanked on each side of the center stone. If you’re interested in more 5-carat diamonds from our collection, you can find them here.
- 5.15ct Cushion Cut Diamond Halo Ring. Orford Ring
$68,000
- 5.05ct GIA Certified Emerald Cut Diamond Platinum Ring. Sanremo Ring
CONTACT FOR PRICE
- 5.09ct Brilliant Cut Diamond Engagement Ring
$88,000
6 Carat Diamond on Finger
Those who want a 6-carat diamond engagement ring will definitely make an impression. If you have a standard 6.5 ring size, a 6-carat diamond will take up 68.8% of the width of your finger. If the diamond has a round cut, it will have a diameter of 11.70mm.
The higher a diamond’s carats, the more noticeable it will be on larger and wider fingers. A 6 carat diamond is a definite statement piece, regardless of your finger size. One thing to keep in mind is that, the larger the diamond, the more visible its inclusions can be. That’s why it’s essential to look for an eye-clean diamond.
If you’re looking for a sparkly 6-carat diamond ring that will steal the show, the Crestview ring will do just that. It features a lively old European-cut 6-carat diamond, which measures 11.54mm x 11.58mm x 6.76mm. There are additional single-cut diamonds on the ring’s shoulders.
Another fabulous 6-carat diamond ring from Estate Diamond Jewelry is the Norristown ring. The pear-shaped diamond has a rose cut and 6 carats. Click here to view our entire collection of 6 carat diamond rings.
- Winona Ring
CONTACT FOR PRICE
- 6.00ct Rose Cut Pear-Shaped Diamond Ring. Norristown Ring
$92,000
- Six Carat Cushion Engagement Ring
Contact Us
7 Carat Diamond on Finger
Diamonds with an astonishing 7 carat weight are rare and expensive. Assuming that your finger is 17mm wide, a 7-carat diamond would take up 72.94% of your finger. It has a diameter of 12.4mm.
If you want a 7-carat diamond, perhaps you’ll like the Rockford ring. The old European-cut diamond is 7.55 carats and GIA-certified. Additional antique French-cut diamonds are set along the ring’s shoulders and surrounded in platinum.
Another 7-carat diamond ring from our collection is the Sussex ring. The ring has an antique cushion-cut diamond with 7 carats in the center. It’s surrounded by a ruby halo and additional diamonds on the ring’s shoulders.
At Estate Diamond Jewelry, we offer unique vintage 7-carat diamond engagement rings. You can see what we have to offer right now on this page.
- Sussex Ring
Contact Us
- Rockford Ring
Contact Us For Price
8 Carat Diamond on Finger
An 8-carat diamond measures 13mm in diameter. If you wear a 6.5 ring size, an 8-carat diamond ring will cover 76.4% of your finger’s width. Diamonds that are 8 carats are beautiful, not to mention large.
Estate Diamond Jewelry also offers some spectacular 8-carat diamond engagement rings, like the Coatbridge ring. This is a solitaire platinum ring featuring an 8.47-carat old European-cut diamond. The diamond is held by six prongs and flanked by baguette-cut diamonds on each side. If you’re interested in more 8-carat diamond rings from our collection, you can see what we have to offer here.
- Coatbridge Ring
SOLD
- 8.58ct Cushion Cut Engagement Ring
SOLD
9 Carat Diamond on Finger
For an average 6.5 ring size, a 9-carat diamond covers 77.7% of the finger’s width. It’s approximately 13.20mm wide. A 9-carat diamond would certainly dominate the finger and would make for a spectacular head turner.
While there aren’t any 9-carat diamonds in our online catalog, we might have some in our showroom. If you’re interested in 9-carat diamond rings, browse here or contact us directly.
10 Carat Diamond on Finger
At 10-carats, a diamond would not only be dazzling, but also harder come and, it goes without saying, incredibly expensive. A round-cut 10-carat diamond is 14mm wide in diameter, taking up 82% of the width of the finger. It weighs approximately 2 grams.
High-quality 10-carat diamonds are fairly rare, so finding one would be a challenge even if you had the budget. And the price? Well, 10-carat diamond rings can be priced at half a million dollars, but it’s possible to find them for a few hundred thousand dollars as well.
If you have your sights set on a 10-carat diamond, contact us, and we’ll help you find the 10-carat diamond of your dreams.
- Fremont Ring
Contact For Price
- Ten Carat Estate Ring
SOLD
- Fifteen Carat Vintage Ring
SOLD
Chart of Diamond Carat and Finger Size
This graph depicts how much of the finger a diamond will cover.
| 1 ct (6.5mm) | 2 ct (8.15mm) | 3 ct (9.35mm) | 4 ct (10.32mm) | 5 ct (10.90mm) | 6 ct (11.70mm) | |
| 4.5 (15.2mm) | 42.8% | 53.6% | 61.6% | 67.8% | 71.7% | 76.9% |
| 5 (15.6mm) | 41.7% | 52.3% | 59.9% | 66.2% | 69.9% | 75% |
| 5.5 (16mm) | 40.6% | 50.9% | 58.5% | 64.5% | 68.2% | 73.2% |
| 6 (16.4mm) | 39.6% | 49.6% | 57% | 62.9% | 66.6% | 71.4% |
| 6.5 (17mm) | 38.2% | 48.2% | 55.3% | 60.70% | 64.5% | 68.82% |
| 7 (17.3mm) | 37.5% | 47.2% | 54.1% | 59.6% | 63% | 67.7% |
| 7.5 (17.7mm) | 36.8% | 46.1% | 52.8% | 58.4% | 61.6% | 66.2% |
How Big Each Diamond Shape Looks on a Finger
The diamond’s shape also affects the carat size, simply because some diamonds are cut to have a larger surface than others. No two diamond cuts carry their weight in the same manner. For example, a round-cut 1-carat diamond is smaller than a 1-carat diamond with an oval, emerald, or pear cut.
Round Cut Diamond on Hand
When we discussed diamond sizes in this article, we referred to round or brilliant-cut diamonds. That’s because round-cut diamonds are naturally flattering on all hand types and sizes, making them the most popular cut. For each carat weight we covered in this article, we talked about the diamond diameter and ring size ratio for round-cut diamonds. No matter what kind of fingers you have, round-cut diamonds would be a good choice.
Princess Cut Diamond on Hand
Even with the same carat weight, princess-cut diamonds are smaller than round-cut diamonds. More precisely, a 1-carat round-cut diamond is 6.5mm in diameter, while a 1-cut princess-cut diamond is only 5.50mm. The princess cut is best suited for those with long hands and slender fingers and is also quite popular.
Cushion Cut Diamond on Hand
A 1-carat cushion-cut diamond is typically smaller than a round-cut diamond of the same carat weight. More specifically, a 1-carat cushion-cut diamond is 5.5mm in diameter, and it takes up less room on the finger.
Oval Cut Diamond on Hand
The oval cut is bigger than the princess cut and the cushion cut. A 1-carat oval-cut diamond is 7.7mm wide on a finger 17mm wide. For comparison purposes, a 2-carat oval-cut diamond is 9mm in diameter, which almost equals a 3-carat round-cut diamond. Oval-cut diamonds create the illusion of length, which is why they’re ideal for short fingers.
Emerald Cut Diamond on Hand
A 1-carat emerald-cut diamond is larger than a 1-carat round-cut diamond, with a diameter of 7mm. The emerald cut is highly sought after and is a good option if you’re looking to give the illusion of an elongated finger.
Radiant Cut Diamond on Hand
The radiant cut is also slightly larger than the round cut. If a 1-carat diamond has a radiant cut, its diameter is 7mm. The radiant cut can look beautiful on both long, slender fingers as well wide fingers.
Pear Cut Diamond on Hand
Since it has an elongated shape, a 1-carat pear-shaped diamond is 7.7mm, while a 2-carat pear-shaped diamond is wider at 9.0mm. Pear-shaped diamonds look most flattering on shorter or smaller fingers, considering their size.
Asscher Cut Diamond on Hand
The Asscher cut is similar to a princess cut, so it’s smaller than a round-cut diamond with the same carat weight. A 1-carat Asscher-cut diamond is approximately 5.5mm wide. Asscher-cut diamonds would look great on square fingers and short hands.
Marquise Cut Diamond on Hand
A marquise-cut diamond is the largest diamond cut, with a 1-carat marquise-cut diamond measuring 10mm wide. Just to compare, a 4-carat round-cut diamond has a diameter of 10.32mm. Marquise-cut diamonds would look the best on short and slender fingers, given their size. They can also look flattering on wider fingers.
Heart Cut Diamond on Hand
A 1-carat heart-shaped diamond and a round-cut diamond carry the same weight and have the same diameter, which is 6.5mm. Since a heart-shaped diamond is wider than the other cuts, the ideal settings are suitable for wide fingers.
Rose Cut Diamond on Hand
A rose cut is flatter and wider than a round cut, which is why a 1-carat rose-cut diamond is 7.5mm wide. Since it’s broader, it’s a good choice for those with wide, thick fingers.
Actual Diamond Size Charts
As you can see from the diamond carat and finger size table, a diamond’s size isn’t measured by carat weight but by its diameter. All these numbers and percentages might be confusing, so we’ve show you how different diamond sizes look on the same hand in the chart above. Keep in mind though, you’ll never completely know how big will a diamond ring fit on a finger until you see it in person or a picture.
What Diamond Size Is Too Big?
Now that we’ve gone through all the available diamond sizes, let’s discuss which diamond ring sizes might be too when worn on a finger. The truth is that there are no rules about right and wrong diamond sizes. The size of the diamond someone opts for depends on many factors, such as their status, style, budget, and personal preference.
Some people simply prefer smaller, minimalistic jewelry, while others like sparkly, bold accessories. For most, their budget determines the size of the diamond they get. For some who can afford a more luxurious price tag a larger diamond will be their ring of choice, whereas others may find it too much for daily wear.
This is why it’s also important to choose a diamond size that is comfortable for everyday wear. The ring should fit your lifestyle and daily routines. If you plan to wear your engagement ring daily, an 8-carat or 9-carat diamond might get in the way.
Trying each diamond ring on your finger will be the best way to tell how it will look. If you’re shopping remotely, a reputable jeweler will be able to help with photos depicting the ring on an actual finger.
Many factors go into how big will a diamond ring fit on a finger. The three most important ones are the diamond’s carat weight, the ring size, and the cut. Interestingly enough, most people can’t even tell the difference between a 1-carat diamond and a 2-carat diamond. That’s why it’s important to actually try a ring on in person in order to get an accurate idea of how big a diamond ring will look on your finger.
At Estate Diamond Jewelry, any ring can be resized at no additional cost and we have curated a wide selection of exceptional diamond rings. Our diamond experts would also be happy to give you advice on the best diamond size and shape based on your ring size.
